Door protection key plates + latch and a small door knob for on the door as noble door hardware.
An individual Retro - door hardware in antique iron, this door hardware with the size distance center lock - Center through hole of 92 mm (PZ92), please measure before ordering!!!
The beautiful doorknob “Pinto” with 1 latch and 2 long plates - made of antique iron and waxed.
This is perfect for historical renovation of your old or new doors.
All parts are beautifully made af a historical original and the door plates are made to fit a ââ¬â¹ââ¬â¹modern profile cylinder lock.
This fantastic door lock set gives a remotely antique look of the early part of this century !
A rotation pin is fitted in a size of 8 x 8 mm (thickness).
The rotation pin is used for a lock set with fixed knob on the door to the outside,
one cannot open the door using the knob and the latch on the inside, which allows you to open the door from the inside. This is achieved using the change pin mandrel.The doorknob is screwed on the thread of the pin, it must be tightened with pliers, it is better to put something lock-side in between, then it never comes loose!Also keep in mind that if you want to equip an old door with this lock set:
Old doors used to be often a lock nut-thorn size of 10 x 10 mm, modern locks have a DIN size of 8 x 8 mm. - We offer a thickening bushing through this site that thickens the mandrel to 10 x 10 mm on, see picture - bushing can be found in our webshop on individual equipment - not included in this delivery!!!.
Delivery: 1 change door hardware, consisting of:
1 doorknob “Pinto-M” + 1 doorknob “Kotten” + 2 protective plates “Kotten” PZ 92mm (hole distance from center of door handle to center hole of keyhole)
Material: iron Waxed brown
plus 1 rotary half spindle for mounting (degree Strength: 8 x 8 mm)
(2LS + + 1tk 1KN HGF 720,60-,243-101,60-M-DWS)
dimensions:
1 Knauf: height 5 cm - width 5cm
Door knob: length 14 cm x width 6 cm
Long plate: Length 28.2 cm x 4 cm hole with a diameter of 1.8 cmDistance between the spindle and keyhole: 92 mm (center to center)Rotary changer spindle thickness: 8 x 8 mm
Estimated weight: 0.8 kg
Care and maintenance recommendation door hardware:
The cast iron surfaces of this fitting (long plates) were coated with a moisture-repellent protective coating.The handles of this set should be regularly treated with polishing wax. This forms a film layer and prevents the natural oxidation of the antique iron!!!
tags: long plate cover door, antique door hardware, door handle 92 mm, AC set antique, 92 mm with a door knob, historic doors, door hardware PZ92, old doors, long plate, knob, protective plates 92 mm,
